Finish: As shown in the picture. Pictures may not reflect the actual colour of the item due to differences between monitors or colour reflections from monitor lighting, backgrounds, etc. Please allow a 1-3cm error due to manual measurement.
Connect the pump to the solar panel, ensuring the water level covers the pump but is below the sprinkler head. Plug the pump's power line into the solar panel's plug and secure it. Place the solar panel in direct sunlight for optimal pump operation. Turn on the switch at the panel's back.
The backup battery charges during normal operation and can run the pump without sunlight. In low sunlight conditions, use the battery by pressing the switch. If fully charged, the pump starts immediately. Battery status: Red (needs charging), Orange (half charged), Green (fully charged). Charge the battery with solar panels. Red or orange LED indicates the need for charging. Turn off the switch at the panel's back to stop working. LED lights are not replaceable. To prevent pump damage, disconnect it from the battery and solar panel if there is no water or during. Disconnect the pump from the battery when the fountain is not in use or before transport. Clean the pump filter periodically after extended use.Keep batteries away from children and pets. Do not mix used and new batteries. Install batteries according to polarity symbols. Remove batteries if left unused for a long time. Never dispose of batteries in a fire.